How To Connect Wireless 360 Controller To Pc

It wasn't that long ago that trying to connect a controller to your PC was either incommunicable or you needed enough of wires and cords to get it washed. Nevertheless, new applied science has finally fabricated information technology easier to connect your controller to your PC by using Bluetooth and similar methods.

Syncing your Xbox 360 Controller is not an exception, and even older models should connect to your laptop or desktop without too much trouble. Hither is a basic rundown of how to connect an Xbox 360 controller to your PC.

Plug in your wireless receiver

This section only applies to those with wireless controllers. If you've got a wired Xbox 360 controller, skip straight toInstall software.

For those of you that ain wireless Xbox 360 controllers, connecting to a PC isn't every bit straightforward as just plugging in the device. Offset off, you'll need to purchase a capable receiver, then run the proper setup magician.

If you don't already have a receiver, they typically cost between $10 and $20. The official Microsoft version will toll a bit more than than that, but there are many tertiary-party versions available that piece of work perfectly well.

After purchasing the wireless receiver, connect it to a compatible USB port on your computer (come across Effigy A below). Once plugged in, a dark-green light will appear on the receiver indicating the device is working properly.

Install software

For the wireless gaming receiver and the wireless Xbox 360 controller to properly sync with one some other, users must download the necessary software via Microsoft's website, or the bundled installation disc packaged with their receiver.

If yous have the same installation CD (probably not, just it's possible), insert it into your PC's main optical drive and follow the on-screen wizard. You may need to restart your computer. If non, you can download from the Xbox 360 Wireless Controller for Windows link; if wired, select Xbox 360 Controller for Windows instead. Cull which version of Microsoft Windows y'all're using — the Windows 7 drivers will piece of work for Windows 8 and Windows 10 — select the operating organisation language and click Download.

Once the download screen pops up, striking Runand let the Xbox 360 Accessories Setup program to install the required files. Again, you may be required to restart your calculator upon completion of the install.

Syncing the controller

If you're using a wired controller, just plug it in. You're good to go. Scroll down toTesting the Controller to make sure everything is working correctly.

If non, you'll demand to connect the wireless Xbox 360 controller with the receiver plugged into your reckoner. To do so, first plough on the controller by holding down the Xbox Guide button in the centre of the controller, and wait for the green backlight to turn on. Afterward, press the connect push button on top of the wireless receiver (Figure B) until it begins to flash green, then press the corresponding push on your controller (Figure C).

The pairing process should only take a few seconds, later which the light on the receiver volition return to solid light-green and one of the four corners around the controller'southward Guide push will light up (Figure D). If you're still having issues, cheque Microsoft's support folio for more than help.

Testing the controller

One time the necessary software is installed and the controller plugged in or synced, it's time to test the connection. Open the Offset carte du jour on your PC, click the search menu, and look for "game controllers." You should encounter an pick that reads: Set up USB game controllers.

To ensure that your controller is functioning properly, test it by turning the joysticks, pulling on the triggers, and pressing all the buttons. If everything is working correctly, you lot'll see the corresponding action highlighted in the app. Your system should reflect when every push button is pushed. If it's reflecting all of your actions, it doesn't matter which area of the screen is lighting upwards.

If your app isn't fully pairing with your controller and certain buttons aren't lighting upwardly the screen, you can check out Xbox's support website for detailed troubleshooting tips.

Kickoff Playing

To keep things convenient, the visitor labeled the Xbox 360 controller as the default setup for virtually new PC games. You probable won't need to play around with settings or set up central bindings to get-go playing.

We recommend that you lot check that your controller is fully paired while yous load your game because if the two devices aren't connected, the game won't recognize your controller. Some newer games back up quick and convenient controller changes; Users can switch to 360 controllers, even if they're in the heart of playing.